HP NC373F User Manual download pdf (Page 9)

Installing an adapter 9

• Place parts on a grounded surface before removing them from their containers.

• Avoid touching pins, leads, or circuitry.

• Always be properly grounded when touching a static-sensitive component or assembly.

Installing an adapter in a server

See the HP ProLiant server documentation for additional information on how to safely install a PCI Express

card in the server.

CAUTION: If the server is not PCI Hot Plug compliant, power it down and unplug the power

cord from the power outlet before removing the server access panel. Failure to do so may

damage the adapter or server.

1. Power down the server.

2. Remove the power cord and server access panel. Then remove the cover bracket from a PCI Express

slot.

WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the

internal system components to cool before touching them.

3. Firmly seat the adapter in a PCI Express slot and secure the adapter bracket.

NOTE: For 1U type servers you may need to replace the standard profile bracket with a low

profile bracket. See Installing a low profile bracket (on page 9).

4. Replace the access panel and plug in the power cord.

Installing a low profile bracket

You may have to install a low profile bracket to complete the product installation. The low profile bracket

replaces the existing standard profile bracket shipped on the product.

To install a low profile bracket:

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

No comments

HP NC373F User Manual Page 9