HP VLS1002i User Manual download pdf (Page 43)

Figure 30 E-mail Notiﬁcation settings

2. To verify that the messaging syste

misconﬁgured correctly , click Test.

If the test E-mail message is not su

ccessfully sent and receive d, correct the applicable information,

and repeat the test.

NOTE:

If thetestisunsuccessful, makesurethat you are using avalid SMTP Server IP Address

and that the address is working properly.

3. Click Apply.

Setting the time and date information

The VLS is originally set to its time of manufacture. Update the time and date settings to ensure that any

communication (for example, if an E-mail is automatically generated) reﬂects the correct date and time.

1. In the right pane, scroll down below the E-mail Notiﬁcation sectionto locatethe SetTimesection.

2. Select the applicable settings, and click Apply.

Figure 31 Set time and date

After you complete these conﬁguration steps for the management system, complete the steps outline d in

the

next section, D eploying iSCSI initiators.

Deploying iSCSI initiators

iSCSI initiators are required to communicate with the iSCSI targets (VLS devices) on the VLS. Each client

that

uses the V LS must be equipped with a software initiator, s uch as the Microsoft iSCSI Software Initiator,

or an

iSCSI storage H BA (for example, the Q LA4050C and QLA 4052C).

If you are using Backup Exec soft ware version 10.x or older, you will need an iSCSI card in order to

use the appliance; otherwise, a software iSCSI initiator will work.

If you are using iSCSI HBAs, install them and the associated software using the manufacturer’s instructions.

HP StorageWorks 1000i Virtual Library System

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 121 122

No comments

HP VLS1002i User Manual Page 43