HP ZR2330w IPS LED Backlit LCDMonitorUser Guide
Rear ComponentsFigure 2-2 Rear ComponentsComponent Function1 AC Power Connector Connects the AC power cord to the monitor.2 DisplayPort Connects the
Connecting the Cables1. Place the monitor in a convenient, well-ventilated location near the computer.2. Remove the cable management clip from the ped
5. Connect one end of the power cord to the AC power connector on the back of the monitor, andthe other end to an electrical wall outlet.Figure 2-4 C
Front Panel ControlsFigure 2-6 Monitor Front Panel ControlsTable 2-1 Monitor Front Panel ControlsControl Function1Menu Opens, selects or exits the O
Adjusting the Monitor1. Tilt the monitor's panel forward or backward to set it to a comfortable eye level.Figure 2-7 Tilting the Monitor2. Swive
3. Adjust the monitor’s height to a comfortable position for your individual workstation. Themonitor’s top bezel edge should not exceed a height that
4. Pivot the monitor from landscape to portrait orientation viewing to adapt to your application.a. Adjust the monitor to full height position and til
NOTE: You can disable the power LED in the OSD menu. Press the Menu button on the front of themonitor, then select Management > Bezel Power LED >
Connecting USB DevicesUSB connectors are used to connect devices such as a digital camera, USB keyboard, or USBmouse. Two USB connectors are located o
Removing the Monitor Pedestal BaseYou can remove the monitor panel from the pedestal base to install the panel on a wall, an optionalswing arm, or oth
© 2012, Hewlett-Packard DevelopmentCompany, L.P.Microsoft, Windows, and Windows Vista areeither trademarks or registered trademarksof Microsoft Corpor
Mounting the MonitorThe monitor panel can be attached to a wall, optional swing arm, or other mounting fixture. Mountingsolutions are sold separately.
Locating the Rating LabelsThe rating labels on the monitor provide the spare part number, product number, and serial number.You may need these numbers
3 Finding More InformationReference GuidesRefer to the HP LCD Monitors Reference Guide included on the CD with your monitor for additionalinformation
A Technical SpecificationsNOTE: All specifications represent the typical specifications provided by HP's componentmanufacturers; actual performan
Table A-1 Specifications (continued)Altitude:OperatingStorage0 to 5000 m0 to 12192 m0 to 16,400 feet0 to 40,000 feetMeasured Power Consumption:Full P
Recognizing Preset Display ResolutionsThe display resolutions listed below are the most commonly used modes and are set as factorydefaults. This monit
Energy Saver FeatureThe monitors support a reduced power state. The reduced power state will be entered into if themonitor detects the absence of eith
About This GuideThis guide provides information on product features, setting up the monitor, and technicalspecifications.WARNING! Text set off in this
iv About This Guide
Table of contents1 Product Features ...
1 Product FeaturesHP IPS LCD MonitorThe LCD (liquid crystal display) monitor has an active matrix, IPS (in-plane switching) panel. Themonitor features
●Intelligent Management AssetControl● Compliant with the following regulated specifications (for additional certifications and agencynotices, refer to
2 Setting Up the MonitorTo set up the monitor, ensure that the power is turned off to the monitor, computer system, and otherattached devices, then fo
Comments to this Manuals