HP mx705c User Manual download pdf (Page 8)

2 User’s Guide

Filename: sa517093.doc Title: User’s Guide

Template: Print_2004.dot Author: WASSER Studios Last Saved By: billm

Revision #: 36 Page: 2 of 20 Printed: 12/01/04 12:35 PM

Power Saving

The monitor will be driven into “Power Saving” mode

by the control signal from the display controller, as

indicated by the amber-color power LED.

State Power Consumption LED Light

ON Normal Green

OFF < 4 W Amber

The power saving states will be kept until a control

signal has been detected, or the keyboard or mouse is

activated. The recovery time from Active OFF state back

to ON state is around 10 seconds.

Install the Monitor

• To connect the tilt/swivel base to the monitor, align

hooks with the sockets on bottom side of the monitor,

and gently push the base towards the front of the

monitor.

• The 15-pin D-shell signal connector on the signal

cable will connect easily to the video adapter output

on your personal computer. Lock both screws on the

connector to ensure a firm connection.

• Turn the PC power switch ON. Then turn the monitor

power switch ON by pressing the switch inward. The

green power indicator will light up.

• Allow about 30 seconds for the CRT tube to warm

up. Data will be displayed on the screen.

• If your display fails to function properly, please first

refer to the section “Troubleshooting” in this manual.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 65 66

No comments

HP mx705c User Manual Page 8