HP LT3200 User Manual download pdf (Page 64)

54 HP HDTV User’s Guide

There is no power.

■ Press the Power button on the remote control.

■ If the Power light on the TV is on (blue), press the Power button on

the TV.

■ Is the AC power cord disconnected? Make sure that both ends of the

power cord are plugged in.

■ Is there power coming from the outlet? Plug a functional lamp or other

electrical device into the same outlet as the TV to make sure that there

is power coming from the outlet.

■ If you are using a power strip, make sure that it is turned on.

The unit cannot be operated.

■ External influences such as lightning and static electricity may cause

improper operation. In this case, operate the unit after first turning on

the power of the TV, or after unplugging the AC power cord and

plugging it back in after 1 or 2 minutes.

The color is strange, faded, or

misaligned.

■ Adjust the picture tone.

■ Is the room too bright? The picture may look dark in a room that is too

bright.

■ Check the input signal setting.

■ If you are watching a component device, make sure that the red, blue,

and green cables are fully inserted into the proper connectors at both

ends.

The power suddenly turned off.

■ Is the sleep timer set?

■ The internal temperature of the TV has increased. Remove any objects

that are blocking the vent, or clean the vent.

Symptom Remedy (Continued)

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 199 200

No comments

HP LT3200 User Manual Page 64