HP LASERJET 9050MFP User Manual download pdf (Page 27)

ENWW Load Trays 1, 2, 3, and 4 25

English

To load Tray 2 and Tray 3

1 Open the tray until it stops.

2 Adjust the left (Y) paper guide by pressing the tab on the guide and

set the guide to the correct paper size.

3 Adjust the front (X) paper guide by pressing the tab on the guide

and set the guide to the correct paper size.

4 Load a stack of media with the top of the stack toward the rear of

the tray. For singled-sided printing, the side to be printed on should

be down. For double-sided printing, the side to be printed on should

be up.

Note

For information about printing on special media, see the use guide.

5 Set the paper lever to Standard if both guides are set to the same

Standard marking, such as Letter or A4. Otherwise, set the lever to

Custom.

6 Close the tray.

7 The paper size and type for this tray appears on the MFP control

panel. Touch OK to verify or see the use guide to make changes.

8 Repeat steps 1 through 7 to load the other tray.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 203 204

No comments

HP LASERJET 9050MFP User Manual Page 27