HP ZBook 15 Base Model Mobile Workstation User Manual download pdf (Page 29)

include a SIM that is preinstalled in the battery bay. If the SIM is not preinstalled, it may be provided

in the HP Mobile Broadband information provided with your computer or the mobile network operator

may provide it separately from the computer.

For information about inserting and removing the SIM, see the

Inserting and removing a SIM

on page 19 section in this chapter.

For information about HP Mobile Broadband and how to activate service with a preferred mobile

network operator, see the HP Mobile Broadband information included with your computer. For

additional information, go to the HP website at

http://www.hp.com/go/mobilebroadband (select

regions/countries only).

Inserting and removing a SIM

CAUTION: To prevent damage to the connectors, use minimal force when inserting a SIM.

To insert a SIM, follow these steps:

1. Shut down the computer.

2. Close the display.

3. Disconnect all external devices connected to the computer.

4. Unplug the power cord from the AC outlet.

5. Turn the computer upside down on a flat surface, with the battery bay toward you.

6. Remove the battery.

7. Insert the SIM into the SIM slot, and gently push the SIM into the slot until it is firmly seated.

NOTE: See the image on the battery bay to determine which way the SIM card should be

inserted into your computer.

8. Replace the battery.

NOTE: HP Mobile Broadband will be disabled if the battery is not replaced.

9. Reconnect external power.

Connecting to a wireless network 19

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 109 110

No comments

HP ZBook 15 Base Model Mobile Workstation User Manual Page 29