Hp ProBook 6465b Notebook-PC User Manual download pdf (Page 59)

Replacing or upgrading the hard drive

CAUTION: To prevent information loss or an unresponsive system:

Shut down the computer before removing the hard drive from the hard drive bay. Do not remove the

hard drive while the computer is on, in the Suspend state, or in Hibernation.

If you are not sure whether the computer is off or in Hibernation, turn the computer on by pressing the

power button. Then shut down the computer through the operating system.

Removing the hard drive

To remove the hard drive:

1. Save your work and shut down the computer.

2. Disconnect AC power and external devices connected to the computer.

3. Remove the battery (see

Inserting or removing the battery on page 39).

4. Remove the bottom cover (see

Removing the bottom cover on page 46).

5. Loosen the 3 hard drive screws (1).

6. Pull the plastic tab on the hard drive (2) towards the side of the computer to disengage the hard

drive from the connector.

7. Use the plastic tab to lift the hard drive up at an angle (3) and remove the drive (4) from the

computer.

Installing a hard drive

To install the hard drive:

1. Insert the hard drive into the hard drive bay at an angle (1), and then lay the hard drive flat in the

hard drive bay (2).

2. Pull the plastic tab (3) towards the center of the computer to engage the hard drive with the

connector.

Replacing or upgrading the hard drive 49

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 113 114

No comments

Hp ProBook 6465b Notebook-PC User Manual Page 59