HP dv7 User Manual download pdf (Page 96)

Card Reader board

Description Spare part number

Card Reader board (includes cable) 681988-001

Before removing the Card Reader board, follow these steps:

1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn

the computer on, and then shut it down through the operating system.

2. Disconnect the power from the computer by unplugging the power cord from the computer.

3. Disconnect all external devices from the computer.

Remove the battery (see

Battery on page 47), and then remove the following components:

a. Hard drive (see

Hard drive on page 48)

b. Optical drive (see

Optical drive on page 53)

c. Keyboard (see

Keyboard on page 59)

d. Top cover (see

Top cover on page 63)

e. System board (see

System board on page 77)

Remove the Card Reader board:

1. Remove the Phillips PM2.0×3.0 screw (1) that secures the Card Reader board to

the system board.

2. Remove the Card Reader board (2).

Reverse this procedure to install the Card Reader board.

88 Chapter 4 Removal and replacement procedures

1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 128 129

No comments

HP dv7 User Manual Page 96