HP TC1000 Quick Start Guide download pdf (Page 36)

1–28 Getting Started

Setting Up the Tablet PC

Setting Up Tablet PC Hardware with a

Standard USB Keyboard

To set up a tablet PC with an optional standard USB keyboard,

follow the instructions below. To set up a tablet PC with a

tablet PC keyboard, see “Setting Up Tablet PC Hardware with a

Tablet PC Keyboard,” first in this chapter.

During the hardware setup, you will:

1. Remove the tablet PC from the portfolio.

2. Insert the battery pack into the tablet PC so the battery pack

can charge.

CAUTION: To prevent unsuccessful software installations or

modifications, do not run the tablet PC on the battery pack while

you are setting up or modifying system software.

3. Connect the tablet PC to external power.

4. Connect an optional USB keyboard to the tablet PC so the

keyboard can be used during software setup.

During software setup you are prompted to press the

F10

key

on an optional keyboard attached to the tablet PC. The

keyboard can be either a tablet PC keyboard or a standard

USB keyboard. You can respond to all other software setup

prompts with the tablet PC pen or either keyboard. A

standard USB keyboard can be purchased from your Compaq

dealer or from most computer retailers.

5. Turn on the tablet PC.

To set up the pen and the tablet PC software, proceed to “Setting

Up the Pen” and “Setting Up the Software,” earlier in this chapter.

If you need help during any hardware or software setup

procedure, see Chapter 3.

For more information about any exterior hardware feature on the

tablet PC or the tablet PC keyboard, see Chapter 4.

280128-001.book!!Page!28!!Sunday,!August!25,!2002!!3:44!PM

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 118 119

No comments

HP TC1000 Quick Start Guide Page 36