Hp LT4200 42 inch Professional LCD HDTV User Manual download pdf (Page 21)

Setting Up the TV

Setting Up the TV 11

The procedures that follow describe how to connect

optional equipment for each type of AV connection,

including the audio connections when applicable.

Connecting the TV signal

sources

The following is an explanation of the types of

connections that are used for a coaxial cable.

If your outdoor antenna uses a 75-ohm coaxial cable

with an F-type connector, screw it onto the ANT/Cable

In connector at the rear of the TV set.

■ A 75-ohm system is generally a round cable with

an F-type connector that can easily be attached to

a connector without tools (sold separately).

■ A 300-ohm system is a flat, twin-lead cable that

can be attached to a 75-ohm connector through a

300/75-ohm adapter (sold separately).

A 75-ohm coaxial cable, round

B 300-ohm twin-lead cable, flat

C F-type connector

Connect the input sources to the TV according to the

type of connection:

■ Antenna or basic cable (TV cable or satellite)

without a separate set-top box: See “Connecting

the cable TV or air broadcast antenna” on

page 12.

■ Cable or satellite with a separate set-top box: See

“Connecting cable or satellite with a set-top box”

on page 12.

WARNING: Before connecting the TV to any

other electronic device, unplug the TV and

electronic device AC power cords from the

AC power outlet.

An F-type connector should be finger-

tightened only. When connecting the

RF cable to the TV, do not use tools to

tighten the F-type connector, because this

may cause damage to the TV.

To connect an external sound system, see

“Connecting an external sound system” on

page 17.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 65 66

No comments

Hp LT4200 42 inch Professional LCD HDTV User Manual Page 21