HP Pavilion dm4-1162us User Manual download pdf (Page 86)

9 Memory modules

Adding or replacing memory modules

The computer has one memory module compartment, which is located on the bottom of the

computer. The memory capacity of the computer can be upgraded by adding a memory module to the

vacant expansion memory module slot or by upgrading the existing memory module in the primary

memory module slot.

WARNING! To reduce the risk of electric shock and damage to the equipment, unplug the power

cord and remove all batteries before installing a memory module.

CAUTION: Electrostatic discharge (ESD) can damage electronic components. Before beginning

any procedure, ensure that you are discharged of static electricity by touching a grounded metal

object.

NOTE: To use a dual-channel configuration when adding a second memory module, be sure that

both memory modules are the same size.

Adding or replacing a memory module in the expansion memory module

slot

The expansion memory module slot is stacked above the primary memory module slot. To add or

replace a memory module in the expansion memory module slot, follow these steps:

1. Save your work.

2. Shut down the computer and close the display.

If you are not sure whether the computer is off or in Hibernation, turn the computer on by

pressing the power button. Then, shut down the computer through the operating system.

3. Disconnect all external devices connected to the computer.

4. Unplug the power cord from the AC outlet.

5. Turn the computer upside down on a flat surface, and then remove the battery.

6. Loosen the memory/wireless module compartment cover screws (1).

76 Chapter 9 Memory modules

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 118 119

No comments

HP Pavilion dm4-1162us User Manual Page 86