HP D5065 User Manual download pdf (Page 16)

HP 18.1” LCD Color Monitor User’s Guide

Configuring Your Monitor

14 English

Protected OSD

When this mode is selected the user can adjust the brightness/ contrast and

OSD Manager only. To enable or disable protected OSD mode:

1 Select PROTECTED OSD to enter the PROTECTED OSD submenu.

2 Select each digit of the six figure password

using the control, pressing

each time to confirm your selection.

3 When you have selected the correct password a sub menu is displayed.

Select YES or NO to select or deselect Protected OSD, then press to

exit.

Setting the Amount of Displayed Information

To set the amount of displayed information, change the screen resolution of

your computer. The higher the screen resolution, the more information you

can see on the screen. It is recommended that you use a resolution of

1280×1024.

It is recommended that you use a refresh rate of 60 Hz. The image refresh rate

is the number of times per second that the image is redrawn.

To find out which resolutions and refresh rates are supported by your

monitor, refer to “Supported Video Modes” on page 16. To change the screen

resolution, please refer to the manual that came with your computer or your

operating system.

Your monitor has a Plug and Play capability (VESA DDC1, DDC2B, DDC2Bi

standard) that enables it to identify itself to suitably equipped HP computers.

NOTE LCD technology does not cause any flicker at low refresh rates.

1. The default password is 040990

ladoga.bk : ladga-us.fb4 Page 14 Wednesday, June 30, 1999 2:04 PM

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 33 34

No comments

HP D5065 User Manual Page 16