Intel Rapid Start Technology (FFS) Guide Technical white paper Table of contents Intel Rapid Start Technology (FFS) Guide ...
10 Enabling Rapid Start Technology in Windows 8 1. From the desktop, click the File Explorer icon. 2. Right-click Computer, and then click Manag
11 3. Select Disk Management. 4. Right-click the hard drive that displays (e.g. the C: drive), and then select Shrink Volume. 5. E
12 6. Click the Shrink button. Note: After this process is complete, make sure to leave the space as unallocated. 7. Restart the computer.
13 Healthy hibernation partition 1. From the Start screen, type Command, right-click the Command prompt, and then select Run as Administrator from
14 NOTE - If your primary drive is formatted as GPT instead of MBR (as is the case on most Windows 8 machines), type the following instead as shown b
15 Enter timer duration In order to set parameters for Rapid Start Technology, the following utilities must be installed: Intel’s Chipset utility
16 4. Click the Save button, and then restart the computer in order to make sure these settings are installed.
17 For Computers with HDD + mSATA module Enabling Rapid Start Technology in Windows 7 1. Ensure the computer is in RAID mode. (ref. System BIOS Con
18 Enabling SRT Smart Response Technology must first be enabled before enabling Rapid Start Technology as follows: 1. From the desktop, click Star
19 Creating the healthy hibernation partition To prepare the healthy hibernation partition on the mSATA module: 1. From the Windows 7 desktop, cli
2 Intel Rapid Start Technology (FFS) Guide Product Definition Intel Rapid Start Technology improves the standard hibernation features by providing a
20 Enter timer duration Install the Intel Rapid Start Technology software. 1. From the desktop, click Start > All Programs > Intel > Inte
Enabling Rapid Start Technology in Windows 8 1. Ensure the computer is in RAID mode. Note: For more information, see the System BIOS Configuration
9. Ensure that the appropriate Intel Chipset Utility and the Intel Rapid Storage Technology software are installed. Enabling Smart Response Tech
2. Select the Accelerate button, and then click Enable Acceleration. 3. Select 18.6 GB for size allocated for the cache memory and Maximized mo
Creating the healthy hibernation partition To prepare the healthy hibernation partition on the mSATA module: 1. From the Start screen, type Co
Enter timer duration To install the Intel Rapid Start Technology software: 1. From the Start screen, type Intel. 2. Select Intel Rapid Start Techn
Issues related to replacing the operating system Removing data from mSATA module If it becomes necessary to reinstall the original operating system,
Disabling Rapid Start Technology 1. Launch Intel Rapid Start Technology. 2. Click Off in the Intel Rapid Start Technology field.
Preparing the mSATA module for the operating system reinstallation To ensure that all data and partitions have been removed from the mSATA module,
3 Enabling Intel Rapid Start Technology System BIOS configuration 1. After pressing the power button to boot up the computer, press the ESC key to b
5. In the Secure Erase page, use the arrows to select Notebook mSATA Drive, and then press Enter. 6. Follow the on-screen instructions to era
7. Once complete, exit the BIOS Menu, and then restart the computer to proceed with the reinstallation of the operating system.
For more information For U.S. support, go to http://www.hp.com/go/contactHP. For worldwide support, go to http://welcome.hp.com/country/us/en/wwcont
4 Note: If your computer uses an HDD + mSATA module, you must also enable RAID mode as follows: 1. In the Device Configuration menu, select the R
5 Note: In Windows 7, you will already be in legacy mode. In Windows 8, you must also make sure that the computer is in UEFI Native mode as follows
6 For Computers with SSD primary drives Enabling Rapid Start Technology in Windows 7 1. From the desktop, click Start, and then right-click Compute
7 4. Right-click the hard drive that displays (e.g. the C: drive), and then select Shrink Volume. 5. Enter 4096 (the amount of space recommended
8 Creating the healthy hibernation partition 1. From the desktop, click Start > All Programs > Accessories. 2. Next, right-click the Comman
9 Enter timer duration In order to set parameters for Rapid Start Technology, the following utilities must be installed: Intel’s Chipset utility
Comments to this Manuals