User Guide
Front bezel controlsControl Function1 Menu button Opens and closes the OSD menu.NOTE: To activate the Menu and the Function buttons, press one of the
Setting up the monitorInstalling the monitor standCAUTION: Do not touch the surface of the LCD panel. Pressure on the panel may cause non-uniformity o
2. Connect a video cable to the video input connector.NOTE: The monitor automatically determines which inputs have valid video signals. The inputs can
3. To enable sound from the monitor’s speakers, connect one end of an audio cable to the audio-in jack on the monitor (select products only) and the o
Adjusting the monitorTilt the display head forward or backward to set it to a comfortable eye level.Turning on the monitor1. Press the power button on
When the monitor is powered on, a Monitor Status message is displayed for ve seconds. The message shows which input is the current active signal, the
b. Pull the bottom edge of the VESA panel up and o the display (2).3. Remove the four screws from the VESA holes located on the rear of the display h
4. Secure the mounting plate to the wall or swing arm of your choice using the four screws included with the mounting plate.Installing a security cabl
2 Using the monitorSoftware and utilitiesThe optical disc, if one is included with the monitor, contains the following les you can install on the com
1. Go to http://www.hp.com/support.2. Select Find your product.3. Follow the on-screen instructions to select your monitor and download the software.U
© Copyright 2016 HP Development Company, L.P.Windows is either a registered trademark or trademark of Microsoft Corporation in the United States and/o
Assigning the Function buttonsPressing one of the four front bezel Function buttons activates the buttons and displays the icons above the buttons. Th
Using Auto-Sleep ModeThe monitor supports an OSD (On-screen display) menu option called Auto-Sleep Mode that allows you to enable or disable a reduced
3 Support and troubleshootingSolving common problemsThe following table lists possible problems, the possible cause of each problem, and the recommend
Using the auto-adjustment function (analog input)When you rst set up the monitor, conduct a Factory Reset of the computer, or change the resolution o
Optimizing image performance (analog input)Two controls in the on-screen display can be adjusted to improve image performance: Clock and Phase (availa
2. Press the buttons on the monitor front bezel to properly adjust the position of the image in the display area of the monitor. The Horizontal Positi
Locating the serial number and product numberThe serial number and product number are located on a label on the rear of the display head. You may need
4 Maintaining the monitorMaintenance guidelines●Do not open the monitor cabinet or attempt to service this product yourself. Adjust only those control
A Technical specicationsNOTE: The product specications provided in the user guide might have changed between the time of manufacturing and delivery
Maximum graphic resolution 1920 x 1080 Optimum graphic resolution 1920 x 1080 Environmental requirements temperatureOperating temperatureStorage tem
About This GuideThis guide provides information on monitor features, setting up the monitor, and technical specications.WARNING! Indicates a hazardou
7 1280 × 1024 63.981 60.0208 1440 × 900 55.935 59.8879 1600 × 900 60.000 60.00010 1680 × 1050 65.290 59.95411 1920 × 1080 67.500 60.000Entering user m
B AccessibilityHP designs, produces, and markets products and services that can be used by everyone, including people with disabilities, either on a s
iv About This Guide
Table of contents1 Getting started ...
4 Maintaining the monitor ...
1 Getting startedImportant safety informationAn AC power cord is included with the monitor. If another cord is used, use only a power source and conne
Product features and componentsFeaturesThe monitor features include the following:●50.8 cm (20-inch) diagonal viewable screen area with 1600 × 900 res
Rear componentsComponent Function1 VESA panel Covers the VESA mounting holes.2 Power connector Connects the power cord to the monitor.3 DisplayPort Co
Comments to this Manuals