HP Tablet Accessory 5697-1697 User Manual download pdf

HP Disk Drive Replacement

Instructions

Abstract

These instructions apply to Fibre Channel and SAS disk

drives.

Printed in Puerto Rico

*5697-1679*

HP Part Number: 5697-1679

Published: June 2012

Edition: 2

About this document

For the latest documentation, go to http://

www.hp.com/support/manuals, and select your

product.

The information contained herein is subject to change

without notice. The only warranties for HP products

and services are set forth in the express warranty

statements accompanying such products and services.

Nothing herein should be construed as constituting an

additional warranty. HP shall not be liable for technical

or editorial errors or omissions contained herein.

WARRANTY STATEMENT: To obtain a copy of the

warranty for this product, see the warranty information

website:

http://www.hp.com/go/storagewarranty

Before you begin

Observe the following precautions when replacing the

disk drive:

• Ensure you have a replacement part available

before removing the failed component. Removing

a component impacts cooling within the enclosure.

Use a drive blank if a new drive is not available.

• HP recommends that the replacement drive

matches the capacity and speed of the original

drive. For example, if the original drive was a

300 GB, 15K RPM drive, the replacement would

be a 300 GB, 15K RPM drive.

• P63x0 and P65x0 storage systems support SAS

disk drives with EVA on the front identification

label. Other SAS drives are not supported.

• Do not remove more than one disk drive at a time

from the enclosure. Doing so would impact

cooling of the enclosure and can cause data loss.

• Parts can be damaged by electrostatic discharge.

Use proper antistatic protection.

• Have a copy of the product user guide available

for reference. You can download a copy of the

user guide from the product support page on the

HP website.

Figure 1 (page 2) shows the numbering of Fibre

Channel disk drives in the disk enclosure used with

the EVA.

Page 1

1 2 3 4 5 6

Summary of Contents

Page 1 - Instructions

Page 2 - Verifying system redundancy

Figure 1 FC disk drive numberingFigure 2 (page 2) shows the numbering of SAS smallform factor (SFF) disk drives and Figure 3 (page 2)shows the numberi

Page 3 - Verifying component failure

Verifying component failureBefore replacing a disk drive, use the followingmethods to verify component failure:CAUTION: If HP P6000 Command View doesn

Page 4

4. Verify the disk operational state. If a hardfailure has occurred, the operational stateappears as (Failed). A disk with animpending failure indicat

Page 5 - Verifying operation

Removing a disk drive1. Determine the status of the disk drive from thehot-plug disk drive LEDs. See Table 1 (page 3).2. Back up all data on the disk

Page 6 - Documentation feedback

NOTE: It can take up to 10 minutes for thecomponent to display good status.• Observe the disk status indicators (Table 1 (page3)). The green indicator

Comments to this Manuals

No comments

HP Tablet Accessory 5697-1697 User Manual

Browse online or download User Manual for HDD/SSD enclosures HP Tablet Accessory 5697-1697. HP Tablet Accessory 5697-1697 User's Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for HDD/SSD enclosures HP Tablet Accessory 5697-1697